Trigger[:Sequence[1]|2]:Source Bus|External|Hold|Immediate|Internal[[1]|2] - Keysight Technologies EPM-P Series Programming Manual

TRIGger[:SEQuence[1]|2]:SOURce
BUS|EXTernal|HOLD|IMMediate|INTernal[[1]|2]
This command configures the trigger system to respond to the specified source.
This command only selects the trigger source. Use the INITiate command to
place the power meter in the wait for trigger state.
This command has the same purpose as
NOTE
TRIGger[1]|2:SOURce BUS|EXTernal|HOLD|IMMediate|INTernal[[1]|2]
Syntax
TRIG
Keysight EPM-P Series Programming Guide
:SEQ 1
2
Space
:SOUR
TRIGger Subsystem
BUS
EXT
HOLD
IMM
INT
1
2
?
13
563