System:communicate:serial[:Receive]:Bits <Numeric_Value - Keysight Technologies EPM-P Series Programming Manual

11 SYSTem Subsystem
SYSTem:COMMunicate:SERial[:RECeive]:BITs <numeric_value>
This command sets the word length for both the receiver and the transmitter. The
word length for the receiver and transmitter are tied together and can either be
set by this command or the equivalent transmitter command :TRANsmit:BITs.
Syntax
SYST
Parameters
Item
numeric_value
Example
Reset condition
On reset, the word length is unaffected.
Query
SYSTem:COMMunicate:SERial[:RECeive]:BITs?
The query returns the current setting of the receive/transmit word length.
Query example
458
:COMM
:SER
Description/Defaul t
A numeric value for the word length
SYST:COMM:SER:REC:BITs 8
SYST:COMM:SER:REC:BITs?
:REC :BIT
This command sets the receiver and
transmitter word length to 8.
This command queries the setting of the
receive/transmit word length.
Keysight EPM-P Series Programming Guide
Space
numeric_value
?
Range of values
7 or 8