Keysight Technologies EPM-P Series Programming Manual page 520

12 TRACe Subsystem
Parameters
Item
character_data – HRESolution: high resolution. The complete capture
Example
Error messages
– If TRAC:STAT is off, the error -221, "Settings Conflict" occurs.
The TRIG:SOUR must be set to something other than IMM, and INIT:CONT must
NOTE
be set to off.
520
Description/Defaul t
buffer at the internal sample rate. The number of points in
this trace is determined by SENS:TRACe:TIMe.
– MRESolution: medium resolution. A subset of the
capture buffer decimated to 1000 points.
– LRESolution: low resolution. A subset of the capture
buffer, decimated to the number of points required for the
display. This is really a way of outputting the same data
used to generate the graphical power display.
TRAC:DATA? HRES
This command returns the trace data for
channel A at high resolution.
Keysight EPM-P Series Programming Guide
Range of values
HRES
MRES
LRES