Related Manuals for Keysight Technologies EPM Series
Summary of Contents for Keysight Technologies EPM Series
- Page 1 Keysight Technologies EPM and EPM-P Series Power Meters E-Series Power Sensors Configuration Guide...
- Page 2 This configuration guide describes the standard configurations, options, and compatible accessories of EPM Series and EPM-P Series power meters. For full specifications, see EPM Series Power Meters E-Series and 8480 Series Power Sensors - Data Sheet (Keysight literature number 5965-6382E) or E4416A/E4417A EPM-P Series Power Meters and E-Series E9320 Peak and Average Power Sensors –...
- Page 3 – Power cord (plug matches destination requirements) EPM Series Power Meters The EPM Series power meters provide average power measurements. The standard N1913A and N1914A power meters include: – Single-channel power meter, order N1913A or dual-channel power meter, order N1914A –...
- Page 4 04 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide E-Series Power Sensors The standard E4412A and E4413A CW power sensors include: – Power sensor 10 MHz to 18 GHz, order E4412A, or power sensor 50 MHz to 26.5 GHz, order E4413A –...
-
Page 5: Firmware Compatibility
For compatibility of power meters, power sensors, and power sensor cables, please refer to the table below. Power sensors Power meters Power sensor cables EPM-P Series EPM Series 11730 (grey) E9288 (blue) E441x family E9300 family E9320 family 8480 Series... -
Page 6: Hardware Options
Hardware Options The following options are available on the EPM and EPM-P Series power meters. All order combinations have to be configured upon ordering; these options are not available for field upgrade. EPM Series power meter Option Description N1913/ 4A-004... -
Page 7: Service And Support Options
1. Options are not available in all countries. Special Options Special options for EPM-P Series power meters, EPM Series power meters, and E-Series sensors are available. The special options provide customized measurement capabilities to fit a wider range of applications. Contact your local Keysight representative for more information. -
Page 8: Available Accessories
– Extra battery for EPM Series power meters with Option 102 Auxiliary Equipment The 11683A range calibrator verifies the accuracy and linearity of the EPM-P and EPM Series power meters. Outputs corresponding to the meter readings of 3, 10, 30, 100, and 300 μW and 1, 3, 10, 30, and 100 mW are provided. - Page 9 09 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide www.axiestandard.org AdvancedTCA Extensions for Instrumentation and Test (AXIe) is an ® open standard that extends the AdvancedTCA for general purpose and semiconductor test. The business that became Keysight was a founding member of the AXIe consortium.
- Page 10 DEKRA Certified ISO9001 Quality Management System www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System This information is subject to change without notice. © Keysight Technologies, 2010 - 2018 Published in USA, April 17, 2018 5990-4173EN www.keysight.com...
Need help?
Do you have a question about the EPM Series and is the answer not in the manual?
Questions and answers