Memory:clear:table - Keysight Technologies EPM-P Series Programming Manual

MEMory:CLEar:TABle

This command is used to clear the contents of the table currently selected using
MEMory:TABLe:SELect. Although the table remains, a
MEMory:TABLe:FREQuency|GAIN:POINts? query returns a 0 as there are no
contents in the table.
This command is an alternative form of the MEMory:CLEar[:NAME] command,
the only difference being the method in which the table is selected.
The contents cleared using this command are non-recoverable.
NOTE
Syntax
Example
MEM:CLE:TABL
Error message
If no table is selected, error -221, "Settings conflict" occurs.
Keysight EPM-P Series Programming Guide
MEM :CLE :TABL
This command clears the contents of
the currently selected table.
MEMory Subsystem 7
311