Keysight Technologies EPM-P Series Programming Manual page 271

Parameter
Item
numeric_value
Example
DISP:WIND1:ANAL:LOW -50
Reset condition
On reset, the value is set to -70 dBm for both windows.
Query
DISPlay:[WINDow[1]|2]:ANALog:LOW? [MIN|MAX]
The query returns the current setting of the analog meter's lower scale limit, or the
value associated with MIN or MAX. The format of the response is <NR3>. The units
in which the results are returned are determined by the current setting of
UNIT:POWer and CALCulate:RELative:STATe as shown in
Query example
DISP:WIND1:ANAL:LOW?
Keysight EPM-P Series Programming Guide
Description/Defaul t
A numeric value for the analog meter lower scale limit:
DEF: the default is -70 dBm
MIN: -150 dBm
MAX: 230 dBm
Units used are determined by the current setting of
UNIT:POWer and CALCulate:RELative:STATe as
shown in the previous table.
This command sets the upper window's
analog meter lower scale limit to -50 dBm
DISPlay Subsystem
Table
This command queries the lower
scale limit set on the analog meter in
the upper window.
5
Range of values
-150 to 230 dBm
DEF
MIN
MAX
5-1.
271