Display[:Window[1]|2]:Trace:lower <Numeric_Value - Keysight Technologies EPM-P Series Programming Manual

5 DISPlay Subsystem
DISPlay[:WINDow[1]|2]:TRACe:LOWer <numeric_value>
This command sets the trace window lower scale limit.
This command is included for compatibility purposes only. It has the same
NOTE
purpose as
SENSe[1]|2:TRACe:LIMit:LOWer <numeric_value>
which should be used in preference.
The units used are dependent on the current setting of SENS:TRAC:UNIT as
shown in the following table:
Table 5-5
Syntax
288
Measurement units
Units:
SENS:TRAC:UNIT
dBm
W
DISP :WIND
DISPlay[:WINDow[1]|2]:TRACe:LOWer
1 :TRAC :LOW
2
Keysight EPM-P Series Programming Guide
Units:
dBm
W
Space
numeric_value
DEF
MIN
MAX
Space
?
MIN
MAX