Output:recorder[1]|2:State <Boolean - Keysight Technologies EPM-P Series Programming Manual

OUTPut:RECorder[1]|2:STATe <boolean>
This command enables or disables the specified recorder output.
Syntax
Example
OUTP:REC1:STAT 1
Reset condition
On reset, the recorder output is OFF.
Query
OUTPut:RECorder[1]|2:STATe?
The query command enters a 1 or 0 into the output buffer indicating whether or
not the specified recorder is switched on.
– 1 is returned when the recorder output is switched ON.
– 0 is returned when the recorder output is switched OFF.
Query example
OUTP:REC2:STAT?
Keysight EPM-P Series Programming Guide
OUTP
:REC
:STAT
1
2
This command enables the specified
recorder output.
This command queries the status of
the recorder output.
OUTput Subsystem
Space
0|OFF
1|ON
?
8
339