Calculate[1]|2|3|4:Limit:state <Boolean - Keysight Technologies EPM-P Series Programming Manual

CALCulate[1]|2|3|4:LIMit:STATe <boolean>
This command enables/disables the test limits for the specified window.
Syntax
Example
Reset condition
On reset, limit checking is disabled.
Query
CALCulate[1]|2|3|4:LIMit:STATe?
The query enters 1 or 0 into the output buffer indicating the status of the limits
testing feature for the specified window/measurement.
– 1 is returned when limits testing is enabled.
– 0 is returned when limits testing is disabled.
Query example
Keysight EPM-P Series Programming Guide
CALC
1
2
3
4
CALC2:LIM:STAT 1
CALC1:LIM:STAT?
:STAT
:LIM
This command enables the limit
checking function for the lower
window upper measurement.
This command queries whether the
limit checking function for the upper
window/upper measurement is on or
off.
CALCulate Subsystem
Space 0|OFF
1|ON
?
3
229