Keysight Technologies EPM-P Series Programming Manual page 462

11 SYSTem Subsystem
Example
Reset condition
On reset, the parity setting is unaffected.
Query
SYSTem:COMMunicate:SERial[:RECeive]:PARity[:TYPE]?
The query returns the current setting of the receive/transmit parity type (EVEN,
ODD, ZERO, ONE or NONE).
Query example
462
SYST:COMM:SER:REC:PAR ODD
SYST:COMM:SER:REC:PAR?
This command sets the transmitter to
include an odd parity bit in the transmitted
data and the receiver to check for odd
parity in the received data.
This command queries what type of parity
has been set on the received/transmitted
data.
Keysight EPM-P Series Programming Guide