Keysight Technologies EPM-P Series Programming Manual page 165

[b] When the measurement result is linear this parameter represents the number of significant digits. When the
[c] E4417A only.
Example
CONF1:RAT DEF,4,(@1),(@2)
Keysight EPM-P Series Programming Guide
measurement result is logarithmic 1 to 4 represents a resolution of 1, 0.1, 0.01 and 0.001 respectively.
Measurement Commands
This command configures the upper
window to make a ratio measurement
of channel A over channel B, using
the current sensor range and a
resolution setting of 4 on both
channels.
2
165