Keysight Technologies EPM-P Series Programming Manual page 109

Operation status
The Operation Status group monitors conditions in the power meter's
measurement process.
The Operation status model is shown in the pullout at the end of this chapter.
The following bits in these registers are used by the power meter:
Bit number
0
1 - 3
4
5
6 - 9
10
11
12
13 to 14
15
Keysight EPM-P Series Programming Guide
Decimal weight Definition
1 CALibrating Summary
- Not used
16 MEASuring Summary
32 Waiting for TRIGger Summary
- Not used
1024 SENSe Summary
2048 Lower Limit Fail Summary
4096 Upper Limit Fail Summary
- Not used
- Not used (always 0)
Power Meter Remote Operation 1
109