Service:bist:trigger:level:state - Keysight Technologies EPM-P Series Programming Manual

15 SERVice Subsystem

SERVice:BIST:TRIGger:LEVel:STATe

This command queries trigger level.
– 1 is returned when the external trigger-in is high.
– 0 is returned when the external trigger-in is low.
Syntax
Example
584
:BIST
SERV
SERV:BIST:TRIG:LEV:STAT?
:TRIG :LEVel
This command queries trigger level.
Keysight EPM-P Series Programming Guide
:STATe
?