STATus:OPERation:SENSe[:SUMMary]
The operation status sense summary register set contains information on the
status of the power sensors.
The following bits in these registers are used by the power meter:
Bit Number
0
1
2
3-15
These bits are set when the power meter is reading data from the
Keysight E-Series or N8480 Series power sensor EEPROM.
These bits are cleared when the power meter is not reading data from the
Keysight E-Series or N8480 Series power sensor EEPROM.
Syntax
Keysight EPM-P Series Programming Guide
Decimal
Definition
Weight
-
Not used
2
Channel A SENSe Status
4
Channel B SENSe Status (E4417A only)
-
Not used
STAT
:OPER
:SENS
:SUMM
STATus Subsystem
10
437