Table 184: Show Mvr6 Interface - Display Description - Edge-Core ECS4110-28T Management Manual

show mvr6 interface
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
The following displays the profiles bound to domain 1:
Console#show mvr6 domain 1 associated-profile
Domain ID : 1
MVR Profile Name Start IPv6 Addr.
-------------------- ------------------------- -------------------------
rd
Console#
This command shows MVR configuration settings for interfaces attached to
the MVR VLAN.
S
YNTAX
show mvr6 [domain domain-id] interface
domain-id - An independent multicast domain. (Range: 1-5)
D S
EFAULT ETTING
Displays configuration settings for all attached interfaces.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
The following displays information about the interfaces attached to the
MVR6 VLAN in domain 1:
Console#show mvr6 domain 1 interface
MVR6 Domain : 1
Port Type Status
-------- -------- ------------------- ---------------- ---------------------
Eth1/ 1 Source Active/Forwarding
Eth1/ 2 Receiver Active/Forwarding
Console#

Table 184: show mvr6 interface - display description

Field Description
Port Shows interfaces attached to the MVR.
Type Shows the MVR port type.
Status Shows the MVR status and interface status. MVR status for source
ports is "ACTIVE" if MVR is globally enabled on the switch. MVR status
for receiver ports is "ACTIVE" only if there are subscribers receiving
multicast traffic from one of the MVR groups, or a multicast group has
been statically assigned to an interface.
– 1317 –
| Multicast Filtering Commands
C 40
HAPTER
End IPv6 Addr.
ff01::fe
Immediate Leave Static Group Address
Disabled ff00::1(VLAN2)
MVR for IPv6
ff01::ff