Table 118: Show Mvr Interface - Display Description; Table 119: Show Mvr Members - Display Description - Edge-Core ECS4610-24F Management Manual

| Multicast Filtering Commands
C 39
HAPTER
Multicast VLAN Registration
Table 117: show mvr - display description (Continued)
Field Description
MVR Group Address A multicast service sent to all attached subscribers
MVR Group Count The number of contiguous MVR group addresses.
The following displays information about the interfaces attached to the
MVR VLAN:
Console#show mvr interface
Port Type
-------- --------
Eth1/ 2 Source
Eth1/ 3 Source
Eth1/ 1 Receiver
Eth1/ 4 Receiver
Console#

Table 118: show mvr interface - display description

Field Description
Port Shows interfaces attached to the MVR.
Type Shows the MVR port type.
Status Shows the MVR status and interface status. MVR status for source
ports is "ACTIVE" if MVR is globally enabled on the switch. MVR
status for receiver ports is "ACTIVE" only if there are subscribers
receiving multicast traffic from one of the MVR groups, or a
multicast group has been statically assigned to an interface.
Immediate Leave Shows if immediate leave is enabled or disabled.
Static Group Address Shows any static MVR group assigned to an interface, and the
receiver VLAN.
The following shows information about the interfaces associated with
multicast groups assigned to the MVR VLAN:
Console#show mvr members
MVR Forwarding Entry Count:1
Group Address Source Address
------------- --------------
225.0.0.9 *
Console#

Table 119: show mvr members - display description

Field Description
MVR Forwarding Entry The number of multicast services currently being forwarded from
Count the MVR VLAN.
Group Address Multicast groups assigned to the MVR VLAN.
– 936 –
Status Immediate
------------- ---------
Active/Up
Inactive/Down
Active/Up Disabled
Active/Down Disabled
VLAN Forwarding Port
---- --------------
2 Eth1/ 1(VLAN3)
Static Group Address
--------------------
225.0.0.1(VLAN1)
225.0.0.9(VLAN3)
Eth1/ 2(VLAN2)