AudioCodes Mediant 4000 SBC User Manual page 506

CHAPTER 20 SIP Definitions
The following procedure describes how to configure routing to destination IP Groups determined by
Dial Plan tags. The procedure is based on the following example scenario: Calls from IP Group
"HQ" with destination (called) prefix number 102 are sent to IP Group "ENG" while calls with
destination prefix number 103 are sent to IP Group "BEL". The destination IP Groups are
determined by the Dial Plan tags, where the tag "Country=England" is used to send calls to IP
Group "ENG" and the tag "Country=Belgium" is used to send calls to IP Group "BEL".
➢
To configure routing to destination IP Groups based on Dial Plan tags:
1. In the Dial Plan table, configure a Dial Plan with Dial Plan rules, where the 'Prefix' parameter is
the destination (called) prefix number. In our example, we will configure a Dial Plan called
"Dial Plan 1" with two Dial Plan rules:
Parameter
Name
Prefix
Tag
The following displays the configuration in the Web interface of the Dial Plan rule for Index 0:
Index 0
UK
102
Country=England;City=London Holland;City=Amsterdam;Country=Belgium
- 473 -
Mediant 4000 SBC | User's Manual
Index 1
Bel-Neth
103