Invalid Value Indications - AudioCodes Mediant 4000 SBC User Manual

CHAPTER 6 Web-Based Management
3. Click Yes, Delete; the row is removed from the table and the total number of configured rows
that is displayed next to the page title and page item in the Navigation tree is updated to reflect
the deletion.
If the deleted row (e.g., a Proxy Set) was referenced in another table (e.g., IP Group),
the reference is removed and replaced with an empty field. In addition, if the reference in
the other table is for a mandatory parameter, the invalid
relevant. For example, if you delete a SIP Interface that you have assigned to a Proxy
Set, the invalid icon appears alongside the Proxy Sets item in the Navigation tree as
well as on the Proxy Sets page.

Invalid Value Indications

The Web interface provides the following indications of invalid values when configuring table rows:
■ Parameters configured with invalid values: An invalid value is a value that is not
permissible for the parameter. This can include incorrect syntax (string, numeral, or character)
or an out-of-range value. If you enter an invalid value and then click Apply, the field is
surrounded by a colored border, as shown in the example below.
If you hover your mouse over the field, a pop-up message appears providing the valid values. If
you enter a valid value, the colored border is removed from the field. If you leave the parameter
at the invalid value and click Apply, the parameter reverts to its previous value.
■ Mandatory parameters that reference rows of other configuration tables:
● Adding a row: If you do not configure the parameter and you click Apply, an error
message is displayed at the bottom of the dialog box. If you click Cancel, the dialog box
closes and the row is not added to the table. For example, if you do not configure the 'SIP
Interface' field (mandatory) for a Proxy Set (in the Proxy Sets table), the below message
appears:
● Editing a row: If you modify the parameter so that it's no longer referencing a row of
another table (i.e., blank value), when you close the dialog box, the Invalid Line icon
appears in the following locations:
◆
◆
◆
For example, if you do not configure the 'SIP Interface' field (mandatory) for Proxy Set #0,
the Invalid Line icon is displayed for the Proxy Sets table, as shown below:
'Index' column of the row.
Page title of the table. The total number of invalid rows in the table is also displayed
with the icon.
Item in the Navigation tree that opens the table.
- 28 -
Mediant 4000 SBC | User's Manual
icon is displayed where