Assigning Rows From Other Tables - AudioCodes Mediant 4000 SBC User Manual

Session border controllers

Hide thumbs Also See for Mediant 4000 SBC:

Table of Contents

CHAPTER 6 Web-Based Management

flash memory, otherwise they are discarded if the device resets (without a save to flash) or

Assigning Rows from Other Tables

Some tables contain parameters whose value is an assigned row (referenced-row) from another

table (referenced-table). For example, the IP Groups table contains the 'Proxy Set' parameter

whose value is an assigned Proxy Set, configured in the Proxy Sets table. These parameter types

provide a drop-down list for selecting the value and a View button, as shown in the example below:

You can assign a referenced-row using one of the following methods:

Selecting a referenced-row from the drop-down list:

Scroll down to the desired item and click it.

Search for the item by entering in the field the first few characters of the desired row, and

then clicking it. The figure below shows an example of searched results for items (Proxy

Sets) that begin with the letter "i":

Selecting an existing referenced-row directly from the referenced-table:

Click View; the table (e.g., IP Groups table) and dialog box in which the button was clicked

is minimized to the bottom-left corner of the Web interface and the referenced-table (e.g.,

Proxy Sets table) opens.

Add a new row, if required; otherwise, skip this step.

Select the desired row in the row-referenced table, and then click Use selected row

located on the top-right of the table, as shown in the example below:

Adding a new referenced-row:

From the drop-down list, select the Add new option; as shown in the example below:

button is surrounded by a red border, you must save your settings to

Mediant 4000 SBC | User's Manual