AudioCodes Mediant 4000 SBC User Manual page 571

CHAPTER 25 Routing SBC
The following procedure describes how to configure Classification rules through the Web interface.
You can also configure it through ini file [Classification] or CLI (configure voip > sbc
classification).
➢
To configure a Classification rule:
1. Open the Classification table (Setup menu > Signaling & Media tab > SBC folder >
Classification Table).
2. Click New; the following dialog box appears:
3. Configure the Classification rule according to the parameters described in the table below.
- 538 -
Mediant 4000 SBC | User's Manual