AudioCodes Mediant 4000 SBC User Manual page 849

CHAPTER 52 Syslog and Debug Recording
Parameter
'Mode'
mode
[LoggingFilters_Mode]
■ [2] Signaling & Media = The option is applicable only to debug
recording (i.e., 'Log Destination' parameter is configured to
Debug Recording Server). The debug recording includes
media (RTP/RTCP/T.38), and only signaling and Syslog
messages associated with the recorded media.
Note: The device requires a lot of resources for media debug
recording. The number of media sessions (and associated sig-
naling) that the device records depends on available resources.
Therefore, when many media sessions need to be recorded
(e.g., when the 'Filter Type' parameter is configured to Any) not
all media sessions (and associated signaling) are recorded. If
the device has no resources to debug record any media, it
doesn't debug record any signaling as well. As debug recording
of signaling requires less resources than media debug record-
ing, if you want to perform debug recording only on signaling,
then it is recommended to configure the parameter to
Signaling.
■ [3] Signaling & Media & PCM = The option is applicable only
to debug recording (i.e., 'Log Destination' parameter is
configured to Debug Recording Server). The debug recording
includes signaling, Syslog messages, media, and PCM.
■ [5] CDR Only = Only CDRs are generated. The option is
applicable only if the 'Log Destination' parameter is configured
to Syslog Server or Local Storage. When configured to
Syslog Server, only CDRs are included in the Syslog
messages (excluding all system logs and alerts) sent to the
Syslog server.
■ [6] Call Flow = The device sends SIP messages (in XML
format), as they occur in real-time, to OVOC for displaying SIP
call dialog sessions as call flow diagrams. For this functionality,
you also need to configure the 'Log Destination' parameter to
Call Flow Server. For enabling this functionality, see
SIP Call Flow Diagrams in OVOC
■ [7] SIP Only = The option is applicable only to debug recording
(i.e. the 'Log Destination' parameter is configured to Debug
Recording Server or Syslog Server). The debug recording
includes only SIP messages.
Note:
■ If you configure the 'Log Destination' parameter to Local
Storage, you must configure the 'Log Type' parameter to CDR
Only.
■ The parameter is not applicable when the 'Filter Type' parameter
is configured to IP Trace.
■ To include Syslog messages in debug recording, it is
unnecessary to enable Syslog functionality.
Enables and disables the rule.
■ [0] Disable
■ [1] Enable (default)
- 816 -
Mediant 4000 SBC | User's Manual
Description
on page 836.
Enabling