AudioCodes Mediant 4000 SBC User Manual page 470

CHAPTER 20 SIP Definitions
Parameter
'Index'
'Name'
account-name
[Account_AccountName]
'Application Type'
application-type
[Account_ApplicationType]
'Served IP Group'
served-ip-group-name
[Account_
ServedIPGroupName]
'Serving IP Group'
serving-ip-group-name
[Account_
ServingIPGroupName]
'Host Name'
host-name
[Account_HostName]
'Contact User'
contact-user
[Account_ContactUser]
Description
Defines an index for the new table row.
Note: Each row must be configured with a unique index.
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 20 characters.
Note: Each row must be configured with a unique name.
Defines the application type:
■ [2] SBC = SBC application.
Defines the IP Group (e.g., IP-PBX) that you want to
register and/or authenticate upon its behalf.
Note:
■ The parameter is applicable only to the SBC
application.
■ By default, all IP Groups are displayed. However, if you
filter the Web display by SRD (using the SRD Filter
box), only IP Groups associated with the filtered SRD
are displayed.
■ The parameter is mandatory.
Defines the IP Group (Serving IP Group) to where the
device sends the SIP REGISTER requests (if enabled) for
registration and authentication (of the Served IP Group).
Note:
■ By default, only IP Groups associated with the SRD to
which the Served IP Group is associated are displayed,
as well as IP Groups of Shared SRDs. However, if you
filter the Web display by SRD (using the SRD Filter
box), only IP Groups associated with the filtered SRD
are displayed, as well as IP Groups of Shared SRDs.
■ The parameter is mandatory.
Defines the Address of Record (AOR) host name. The host
name appears in SIP REGISTER From/To headers as
ContactUser@HostName. For a successful registration,
the host name is also included in the URI of the INVITE
From header.
The valid value is a string of up to 49 characters.
Note: If the parameter is not configured or if registration
fails, the 'SIP Group Name' parameter value configured in
the IP Groups table is used instead.
Defines the AOR username. This appears in REGISTER
From/To headers as ContactUser@HostName, and in
INVITE/200 OK Contact headers as
ContactUser@<device's IP address>.
The valid value is a string of up to 60 characters. By
default, no value is defined.
- 437 -
Mediant 4000 SBC | User's Manual