CHAPTER 44 Reporting DSP Utilization through SNMP MIB
Mediant 4000 SBC | User's Manual
44
Reporting DSP Utilization through SNMP MIB
You can obtain information on the percentage of DSP resources utilized by the device, through the
SNMP MIB table, acPMDSPUsage. You can also configure low and high DSP utilization
thresholds
for
this
MIB,
that
if
crossed,
the
SNMP
trap
event,
acPer-
formanceMonitoringThresholdCrossing is sent by the device. For more information on this MIB,
refer to the SNMP Reference Guide.
- 732 -