AudioCodes Mediant 4000 SBC User Manual page 107

CHAPTER 9 INI File-Based Management
● A Data line must end with a semicolon ";".
■ End-of-Table Mark: Indicates the end of the table. The same string used for the table's title,
preceded by a backslash "\", e.g., [\MY_TABLE_NAME].
The following displays an example of the structure of a table ini file parameter:
[Table_Title]
; This is the title of the table.
FORMAT Index = Column_Name1, Column_Name2, Column_Name3;
; This is the Format line.
Index 0 = value1, value2, value3;
Index 1 = value1, $$, value3;
; These are the Data lines.
[\Table_Title]
; This is the end-of-the-table-mark.
■ The table ini file parameter formatting rules are listed below:
■ Indices (in both the Format and the Data lines) must appear in the same order. The Index field
must never be omitted.
■ The Format line can include a subset of the configurable fields in a table. In this case, all other
fields are assigned with the pre-defined default values for each configured line.
■ The order of the fields in the Format line isn't significant (as opposed to the Index fields). The
fields in the Data lines are interpreted according to the order specified in the Format line.
■ The double dollar sign ($$) in a Data line indicates the default value for the parameter.
■ The order of the Data lines is insignificant.
■ Data lines must match the Format line, i.e., it must contain exactly the same number of Indices
and Data fields and must be in exactly the same order.
■ A row in a table is identified by its table name and Index field. Each such row may appear only
once in the ini file.
■ Table dependencies: Certain tables may depend on other tables. For example, one table may
include a field that specifies an entry in another table. This method is used to specify additional
attributes of an entity, or to specify that a given entity is part of a larger entity. The tables must
appear in the order of their dependency (i.e., if Table X is referred to by Table Y, Table X must
appear in the ini file before Table Y).
The table below displays an example of a table ini file parameter:
[ CodersGroup0 ]
FORMAT CodersGroup0_Index = CodersGroup0_Name, CodersGroup0_pTime,
CodersGroup0_rate, CodersGroup0_PayloadType, CodersGroup0_Sce, CodersGroup0_
CoderSpecific;
CodersGroup0 0 = g711Alaw64k, 20, 0, 255, 0, 0;
CodersGroup0 1 = eg711Ulaw, 10, 0, 71, 0, 0;
[ \CodersGroup0 ]
- 74 -
Mediant 4000 SBC | User's Manual