AudioCodes Mediant 4000 SBC User Manual page 101

CHAPTER 8 SNMP-Based Management
3. Configure the SNMP V3 parameters according to the table below.
4. Click Apply, and then reset the device with a save-to-flash for your settings to take effect.
Table 8-3: SNMPv3 Users Table Parameters Description
Parameter
'Index'
[SNMPUsers_
Index]
'User Name'
username
[SNMPUsers_
Username]
'Authentication
Protocol'
auth-
protocol
[SNMPUsers_
AuthProtocol]
'Privacy
Protocol'
priv-
protocol
[SNMPUsers_
PrivProtocol]
'Authentication
Key'
auth-key
[SNMPUsers_
AuthKey]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Name of the SNMP v3 user. The name must be unique.
Authentication protocol of the SNMP v3 user.
■ [0] None (default)
■ [1] MD5
■ [2] SHA-1
Privacy protocol of the SNMP v3 user.
■ [0] None (default)
■ [1] DES
■ [2] 3DES
■ [3] AES-128
Authentication key. Keys can be entered in the form of a text password or
long hex string. Keys are always persisted as long hex strings and keys are
localized.
- 68 -
Mediant 4000 SBC | User's Manual
Description