AudioCodes Mediant 4000 SBC User Manual page 350

CHAPTER 18 Core Entities
3. Configure the Media Realm according to the parameters described in the table below.
4. Click Apply.
Table 18-1: Media Realms table Parameter Descriptions
Parameter
General
'Index'
[CpMediaRealm_
Index]
'Name'
name
[CpMediaRealm_
MediaRealmName]
'Topology Location'
topology-
location
[CpMediaRealm_
TopologyLocation]
'IPv4 Interface
Name'
ipv4
[CpMediaRealm_
IPv4IF]
'IPv6 Interface
Name'
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating the row in
other tables.
The valid value is a string of up to 39 characters.
Note:
■ The parameter is mandatory.
■ Each row must be configured with a unique name.
■ The parameter value cannot contain a forward slash (/).
Defines the display location of the Media Realm in the Topology view.
■ [0] Down = (Default) The Media Realm element is displayed on the
lower border of the view.
■ [1] Up = The Media Realm element is displayed on the upper border
of the view.
For more information on the Topology view, see
SIP Entities in Topology
Assigns an IPv4 network interface to the Media Realm.
By default, no value is defined.
To configure IP network interfaces, see
Interfaces.
Assigns an IPv6 network interface to the Media Realm.
By default, no value is defined.
- 317 -
Mediant 4000 SBC | User's Manual
Description
Building and Viewing
View.
Configuring IP Network