AudioCodes Mediant 4000 SBC User Manual page 620

CHAPTER 26 SBC Manipulations
Parameter
'ReRoute IP Group'
re-route-ip-group-
name
[IPOutboundManipulation_
ReRouteIPGroupName]
Action
'Manipulated Item'
manipulated-uri
[IPOutboundManipulation_
IsAdditionalManipulation]
'Remove From Left'
remove-from-left
[IPOutboundManipulation_
RemoveFromLeft]
'Remove From Right'
remove-from-right
[IPOutboundManipulation_
RemoveFromRight]
'Leave From Right'
leave-from-right
[IPOutboundManipulation_
LeaveFromRight]
'Prefix to Add'
prefix-to-add
[IPOutboundManipulation_
Prefix2Add]
Defines the IP Group that initiated (sent) the SIP redirect
response (e.g., 3xx) or REFER message. The parameter is
typically used for re-routing requests (e.g., INVITEs) when
interworking is required for SIP 3xx redirect responses or
REFER messages.
The default is Any (i.e., any IP Group).
Note:
■ The parameter functions together with the 'Call Trigger'
parameter (see below).
■ For more information on interworking of SIP 3xx redirect
responses or REFER messages, see
Redirect Responses
Messages, respectively.
Defines the element in the SIP message that you want
manipulated.
■ [0] Source URI = (Default) Manipulates the source SIP
Request-URI user part.
■ [1] Destination URI = Manipulates the destination SIP
Request-URI user part.
■ [2] Calling Name = Manipulates the calling name in the SIP
message.
Defines the number of digits to remove from the left of the
manipulated item prefix. For example, if you enter 3 and the user
name is "john", the new user name is "n".
Defines the number of digits to remove from the right of the
manipulated item prefix. For example, if you enter 3 and the user
name is "john", the new user name is "j".
Defines the number of digits to keep from the right of the
manipulated item.
Defines the number or string to add in the front of the
manipulated item. For example, if you enter 'user' and the user
name is "john", the new user name is "userjohn".
If you set the 'Manipulated Item' parameter to Source URI or
Destination URI, you can configure the parameter to a string of
up 49 characters. If you set the 'Manipulated Item' parameter to
Calling Name, you can configure the parameter to a string of up
to 36 characters.
- 587 -
Mediant 4000 SBC | User's Manual
Description
Interworking SIP 3xx
and Interworking SIP REFER