AudioCodes Mediant 4000 SBC User Manual page 886

Session border controllers

Hide thumbs Also See for Mediant 4000 SBC:

Table of Contents

CHAPTER 57 Testing SIP Signaling Calls

Test Call Rules table configuration at Device B:

Registration Test Call Scenario: This example describes the configuration for testing the

registration and authentication (i.e., username and pas,sword) process of a simulated test

endpoint on the device with an external proxy/registrar server. This is useful, for example, for

verifying that endpoints located in the LAN can register with an external proxy and

subsequently, communicate with one another.

This example assumes that you have configured your device for communication between LAN

phone users such as IP Groups to represent the device (10.13.4.12) and the proxy server, and

IP-to-IP routing rules to route calls between these IP Groups.

Test Call Rules table configuration:

Endpoint URI: "201"

Maximum Channels for Session: "3" (configures three endpoints - "201", "202" and

Endpoint URI: "101"

Called URI: "itsp"

Route By: Dest Address

Destination Address: "10.13.4.12" (this is the IP address of the device itself)

SIP Interface: SIPInterface_0

Auto Register: Enable

User Name: "testuser"

Password: "12345"

Call Party: Caller

Mediant 4000 SBC | User's Manual

Troubleshooting