Areas Of The Gui - AudioCodes Mediant 4000 SBC User Manual

Session border controllers
Hide thumbs Also See for Mediant 4000 SBC:
Table of Contents

Advertisement

CHAPTER 6    Web-Based Management
3.
In the 'Username' and 'Password' fields, enter the username and password, respectively.
4.
If you want the Web browser to remember your username, select the 'Remember Me' check
box and then agree to the browser's prompt (depending on your browser). On your next login
attempt, the 'Username' field is automatically populated with your username.
5.
Click Log In.

Areas of the GUI

The areas of the Web interface's GUI are shown in the figure below and described in the
subsequent table.
The default login username and password is "Admin" and "Admin", respectively. To
change the login credentials, see
The username and password is case-sensitive.
By default, Web access is only through the IP address of the OAMP interface.
However, you can allow access from all of the device's IP network interfaces, by
setting the EnableWebAccessFromAllInterfaces parameter to 1.
By default, autocompletion of the login username is enabled whereby the
'Username' field offers previously entered usernames. To disable autocompletion,
use the [WebLoginBlockAutoComplete] ini file parameter.
Depending on your Web browser's settings, a security warning box may be
displayed. The reason for this is that the device's certificate is not trusted by your
PC. The browser may allow you to install the certificate, thus skipping the warning
box the next time you connect to the device. If you are using Windows Internet
Explorer, click View Certificate, and then Install Certificate. The browser also
warns you if the host name used in the URL is not identical to the one listed in the
certificate. To resolve this, add the IP address and host name (ACL_nnnnnn, where
nnnnnn is the serial number of the device) to your hosts file, located at /etc/hosts
on UNIX or C:\Windows\System32\Drivers\ETC\hosts on Windows; then use the
host name in the URL (e.g., https://ACL_280152). Below is an example of a host
file:
127.0.0.1 localhost
10.31.4.47 ACL_280152
Configuring Management User
- 18 -
Mediant 4000 SBC | User's Manual
Accounts.

Advertisement

Table of Contents
loading

Table of Contents