Viewing And Deleting Dhcp Clients - AudioCodes Mediant 4000 SBC User Manual

CHAPTER 16 Services
Table 16-5: DHCP Static IP Table Parameter Descriptions
Parameter
'Index'
dhcp static-
ip <index>
[DhcpStaticIP_
Index]
'DHCP Server
Index'
dhcp-server-
number
[DhcpStaticIP_
DhcpServerIndex]
'IP Address'
ip-address
[DhcpStaticIP_
IPAddress]
'MAC Address'
mac-address
[DhcpStaticIP_
MACAddress]

Viewing and Deleting DHCP Clients

The DHCP Clients table lets you view currently serviced DHCP clients by the DHCP server. The
table also lets you delete DHCP clients. If you delete a client, the DHCP server ends the lease of
the IP address to the client and the IP address becomes available for allocation by the DHCP
server to another client.
The following procedure describes how to view DHCP clients through the Web interface. You can
also view this through CLI:
■ To view DHCP clients:
# show network dhcp clients
■ To view DHCP clients according to IP address:
# show network dhcp ip
■ To view DHCP clients according to MAC address:
# show network dhcp mac
■ To view DHCP clients that have been blacklisted from DHCP implementation (due to
duplicated IP addresses in the network, where another device is using the same IP address as
the one assigned to the client):
# show network dhcp black-list
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Associates the DHCP Static IP table entry with a DHCP server that you
configured in Configuring the DHCP
Note: Currently, only one DHCP server (Index 0) can be configured and
therefore, the parameter is always set at 0.
Defines the "reserved", static IP address (IPv4) to assign the DHCP
client.
The default is 0.0.0.0.
Defines the DHCP client by MAC address (in hexadecimal format).
The valid value is a string of up to 20 characters. The format includes six
groups of two hexadecimal digits, each separated by a colon. The
default MAC address is 00:90:8f:00:00:00.
- 193 -
Mediant 4000 SBC | User's Manual
Description
Server.