AudioCodes Mediant 4000 SBC User Manual page 297

CHAPTER 16 Services
3. Configure an HTTP Proxy server according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
Table 16-20:HTTP Proxy Servers Table Parameter Descriptions
Parameter
'Index'
[HTTPServer_Index]
'Name'
name
[HTTPServer_
ServiceName]
'Domain Name'
domain-name
[HTTPServer_
DomainName]
'Listening Interface'
listening-int
[HTTPServer_
ListeningInterface]
Defines an index number for the new table row.
Note:
■ Each row must be configured with a unique index.
■ The parameter is mandatory.
Defines a descriptive name, which is used when associating the row
in other tables.
The valid value is a string of up to 40 characters. By default, no value
is defined.
Note:
■ Each row must be configured with a unique name.
■ The parameter is mandatory.
■ The parameter value cannot contain a forward slash (/).
Defines a domain name (FQDN). This is configured only when
multiple DNS domains share the same IP address.
Note: The NGINX directive for this parameter is "server_name".
Assigns an IP Interface to the HTTP Proxy service. To configure IP
Interfaces, see Configuring IP Network Interfaces
Note:
■ The parameter is mandatory.
■ The NGINX directive for this parameter is " listen ip".
- 264 -
Mediant 4000 SBC | User's Manual
Description
on page 96.