CHAPTER 30 CRP Configuration
Table 30-1: Pre-configured IP Groups in the IP Groups Table
Index
1
"CRP Users"
2
"CRP Proxy"
3
These IP Groups are used in the IP-to-IP routing rules to indicate the source and destination of the
call (see
Pre-Configured IP-to-IP Routing
●
●
Pre-Configured IP-to-IP Routing Rules
For the CRP application, the IP-to-IP Routing table is pre-configured with IP-to-IP routing rules.
These rules depend on the configured Call Survivability mode, as described in
Survivability
●
●
Normal Mode
The pre-configured IP-to-IP routing rules for the Normal CRP call survivability mode are shown in
the table below:
Table 30-2: Pre-Configured IP-to-IP Routing Rules for CRP Normal Mode
Source IP
Index
Group /
Emergency
1
3
#1 [CRP
4
#1 [CRP
Name
Type
User
Server
"CRP
Server
Gateway"
These IP Groups cannot be deleted and additional IP Groups cannot be configured.
The IP Groups can be edited, except for the fields listed above, which are read-
only.
For accessing the IP Groups table and for a description of its parameters, see
Configuring IP
Groups.
Mode.
The IP-to-IP Routing table is read-only.
For accessing the IP-to-IP Routing table and for a description of its parameters,
see
Configuring SBC IP-to-IP Routing
Request
Type
Any
OPTIONS
All
Users]
All
Users]
Description
LAN users (e.g., IP phones) at the branch office
Server (e.g., hosted IP PBX at the Enterprise's
headquarters)
Device's interface with the PSTN
Rules).
Rules.
Destination
Destination
Type
IP Group
Dest
-
Address
IP Group
#2 [CRP
Proxy]
IP Group
#1 [CRP
Users]
- 626 -
Mediant 4000 SBC | User's Manual
Configuring Call
Alternative
Destination
Route
Address
Options
Internal
Route Row
-
Route Row
-
Alternative
Route
Ignore
Inputs