Miscellaneous Cdr Configuration; Storing Cdrs On The Device - AudioCodes Mediant 4000 SBC User Manual

CHAPTER 51 Reporting Information to External Party
c. Click Apply.

Miscellaneous CDR Configuration

Miscellaneous but important CDR configuration parameters are listed below:
■ To enable or disable the inclusion of the sequence number (S=) in CDR Syslog messages, use
the 'CDR Syslog Sequence Number' [CDRSyslogSeqNum] parameter.
■ The device sends CDRs only for dialog-initiating INVITE messages (call start), 200 OK
responses (call connect) and BYE messages (call end). If you want to enable the generation of
CDRs for non-call SIP dialogs (such as SUBSCRIBE, OPTIONS, and REGISTER), use the
[EnableNonCallCdr] parameter.
■ To configure the units of measurement for the call duration in CDRs ("Duration" CDR field),
use the [CallDurationUnits] parameter.
■ To configure the time zone (e.g., GMT+1) that is displayed with the timestamp in CDRs
("Connect Time", "Release Time", and "Setup Time" CDR fields), use the [TimeZoneFormat]
parameter

Storing CDRs on the Device

CDRs generated by the device can be stored locally on the device ( or internal SD card).
You can specify the calls for which you wish to create locally stored CDRs. This is done using
Logging Filter rules in the Logging Filters table. For example, you can configure a rule to create
locally stored CDRs for traffic belonging only to IP Group #2.
Locally stored CDRs are saved in a comma-separated values file (*.csv), where each CDR is on a
dedicated row or line. An example of a CSV file with two CDRs are shown below :
■ CSV file viewed in Excel:
■ CSV file viewed in a text editor (Notepad):
The device's CLI provides enhanced support for performing various actions on locally stored
CDRs:
■ To view the CDR column headers corresponding to the CDR data in the CSV file:
● SBC CDRs:
(config-system)# cdr
(cdr)# cdr-format show-title local-storage-sbc
session id,report type,call duration, call end time, call connect time,call start time,
call originator, termination reason, call id, srce uri, dest uri
■ To view stored CDR files:
● View all stored CDR files:
- 766 -
Mediant 4000 SBC | User's Manual