AudioCodes Mediant 4000 SBC User Manual page 636

CHAPTER 28 Advanced SBC Features
■ Configuring an IP Profile (namely, the 'Extension Coders Group' parameter) and IP Group
(namely, the 'IP Profile' parameter) for the media source
■ Designating the media source IP Group as the external media source (in the External Media
Source table, as described above)
■ Configuring IP Profiles (namely, the 'Reliable Held Tone Source' and 'Play Held Tone'
parameters) and IP Groups for the users
However, specific configuration may differ based on your implementation of this MoH feature. For
example, you may implement this feature in one of the following architectures:
■ A company with an on-site external media source for playing all MoH to branch users.
■ A company with an on-site external media source that only plays MoH to branch users when
connectivity with the remote media source is down
A configuration example of an on-site external media source that is always used to play MoH to its
branch users is shown below and subsequently described.
1. Open the Coder Groups table (see
a Coders Group (e.g., AudioCodersGroups_0) with the coder(s) to use for communication
between the device and the media source.
2. Open the IP Profiles table (see
Profiles:
● External Media Source:
◆
● Branch Users:
◆
◆
3. Open the IP Groups table (see
Groups:
● External Media Source:
◆
● Branch Users:
◆
4. Open the External Media Source table (see the beginning of this section), and then configure an
External Media Source entity and associate it with the IP Group that you configured for the
external media source in Step 3 (above).
Configuring IP Profiles
'Extension Coders Group': Assign the Coders Group configured in Step 1 (above).
'Reliable Held Tone Source': No
' Play Held Tone': External
Configuring IP Groups
'IP Profile': Assign the IP Profile configured for the external media source in Step 2
(above)
'IP Profile': Assign the IP Profile configured for the branch users in Step 2 (above)
Configuring Coder Groups
on page 395), and then configure two IP
on page 346), and then configure two IP
- 603 -
Mediant 4000 SBC | User's Manual
on page 384), and then configure