AudioCodes Mediant 4000 SBC User Manual page 792

Session border controllers
Hide thumbs Also See for Mediant 4000 SBC:
Table of Contents

Advertisement

CHAPTER 51    Reporting Information to External Party
Metric
LocalID
RemoteID
OrigID
LocalAddr
RemoteAddr
LocalGroup
RemoteGroup
LocalMAC
Timestamps
SessionDesc
Parameter
-
Local ID - identifies the reporting endpoint for the
media session
-
Remote ID - identifies the remote endpoint of the
media session
-
Originating ID - Identifies the endpoint which originated
the session
-
Local Address - IP address, port, and SSRC of the
endpoint/UA which is the receiving end of the stream
being measured
-
Remote Address - IP address, port, and SSRC of the
the source of the stream being measured
-
Local Group ID - identification for the purposes of
aggregation for the local endpoint
-
Remote Group ID - identification for the purposes of
aggregation for the remote endpoint
-
Media Access Control (MAC) address of the local SIP
device
START
Start time of the media session.
STOP
End time of the media session.
PT
Payload Type - 'payload type' parameter in the RTP
packets (i.e., the codec).
PD
Payload Description - description of the codec
SR
Sample Rate - rate at which the voice was sampled
FD
Frame Duration (msec) - packetization rate
FO
Frame Octets - number of octets in each frame per
RTP packet
FPP
Frames per Packets - number of frames per RTP
packet
PLC
Packet Loss Concealment - indicates whether a PLC
algorithm was used for the session ("0" - unspecified;
"1" - disabled; "2" - enhanced; "3" - standard)
SSUP
Silence Suppression State - indicates whether silence
suppression, also known as Voice Activity Detection
(VAD) is enabled ("on" or "off")
- 759 -
Mediant 4000 SBC | User's Manual
Description

Advertisement

Table of Contents
loading

Table of Contents