AudioCodes Mediant 4000 SBC User Manual page 490

CHAPTER 20 SIP Definitions
Parameter
'Attributes To Get'
attr-to-get
[CallSetupRules_
AttributesToGet]
'Row Role'
row-role
[CallSetupRules_
RowRole]
'Condition'
condition
[CallSetupRules_
Condition]
param.call.dst.user
■ To send an HTTP POST to notify the HTTP server of call
connection status:
'connectionStatus'
Note: The parameter is applicable only if the 'Request Type' parameter
is configured to any value other than None.
Defines the Attributes of the queried LDAP record that the device must
handle (e.g., retrieve value).
The valid value is a string of up to 100 characters. Up to five attributes
can be defined, each separated by a comma (e.g., msRTCSIP-
PrivateLine,msRTCSIP-Line,mobile).
Note:
■ The parameter is applicable only if you configure the 'Request
Type' parameter to LDAP.
■ The device saves the retrieved attributes' values for future use in
other rules until the next LDAP query or until the call is connected.
Thus, the device does not need to re-query the same attributes.
Determines which condition must be met in order for this rule to be
performed.
■ [0] Use Current Condition = The Condition configured for this rule
must be matched in order to perform the configured action (default).
■ [1] Use Previous Condition = The Condition configured for the
rule located directly above this rule in the Call Setup table must be
matched in order to perform the configured action. This option lets
you configure multiple actions for the same Condition.
Defines the condition that must exist for the device to perform the
action.
The valid value is a string of up to 200 characters (case-insensitive).
Regular Expression (regex) can also be used. You can also use the
built-in syntax editor to help you configure the field. Click the Editor
button located alongside the field to open the Editor, and then simply
follow the on-screen instructions.
Examples:
■ LDAP:
✔
ldap.attr.mobile exists (if Attribute "mobile" exists in AD)
✔
param.call.dst.user == ldap.attr.msRTCSIP-PrivateLine (if
called number is the same as the number in the Attribute
"msRTCSIP-PrivateLine")
✔
ldap.found !exists (if LDAP record not found)
✔
ldap.err exists (if LDAP error exists)
■ Dial Plan:
✔
dialplan.found exists (if Dial Plan exists)
- 457 -
Mediant 4000 SBC | User's Manual
Description