Using Dial Plan Tags For Sbc Ip-To-Ip Routing - AudioCodes Mediant 4000 SBC User Manual

CHAPTER 20 SIP Definitions
The CLI lets you export Dial Plans and Dial Plan rules to a remote server, using the
export-csv-to command under (config-voip)# sbc dial-plan. For more
information, refer to the CLI Reference Guide.
➢
To export all configured Dial Plans with their corresponding Dial Plan rules:
1. Open the Dial Plan table.
2. From the 'Action' drop-down menu, choose Export; the following dialog box appears:
3. Select the Save File option, and then click OK; the file is saved to the default folder on your
PC for downloading files.
➢
To export Dial Plan rules of a specific Dial Plan:
1. Open the Dial Plan table.
2. Select the required Dial Plan, and then click the Dial Plan Rule link; the Dial Plan Rule table
opens, displaying the rules of the selected Dial Plan.
3. From the 'Action' drop-down menu, choose Export; a dialog box appears (as shown above).
4. Select the Save File option, and then click OK; the file is saved to the default folder on your
PC for downloading files.

Using Dial Plan Tags for SBC IP-to-IP Routing

You can use Dial Plan tags with IP-to-IP Routing rules in the IP-to-IP Routing table, where tags can
be used for the following:
■ Matching routing rules by source and/or destination prefix numbers (see
for Matching Routing
■ Locating destination IP Group (see
Rules)
Using Dial Plan Tags for Routing
- 470 -
Mediant 4000 SBC | User's Manual
Using Dial Plan Tags
Destinations)