AudioCodes Mediant 4000 SBC User Manual page 384

CHAPTER 18 Core Entities
'Created By Routing Server'
[IPGroup_
CreatedByRoutingServer]
'Used By Routing Server'
used-by-routing-server
[IPGroup_UsedByRoutingServer]
'Proxy Set Connectivity'
show voip proxy sets
status
[IPGroup_ProxySetConnectivity]
Parameter Description
■ If the parameter is not configured, the value of the
global parameter, ProxyName is used instead (see
Configuring Proxy and Registration
■ The parameter overrides inbound message
manipulation rules that manipulate the host name in
Request-URI, To, and/or From SIP headers. If you
configure the parameter and you want to manipulate
the host name in any of these SIP headers, you must
apply your manipulation rule (Manipulation Set ID) to
the IP Group as an Outbound Message Manipulation
Set (see the IPGroup_OutboundManSet parameter),
when the IP Group is the destination of the call. If
you apply the Manipulation Set as an Inbound
Message Manipulation Set (see the IPGroup_
InboundManSet parameter), when the IP Group is
the source of the call, the manipulation rule is
overridden by the SIP Group Name parameter.
(Read-only) Indicates whether the IP Group was created
by a third-party routing server:
■ [0] No
■ [1] Yes
For more information on the third-party routing server
feature, see Centralized Third-Party Routing
Enables the IP Group to be used by a third-party routing
server for call routing decisions.
■ [0] Not Used (default)
■ [1] Used
For more information on the third-party routing server
feature, see Centralized Third-Party Routing
(Read-only field) Displays the connectivity status with
Server-type IP Groups. As the Proxy Set defines the
address of the IP Group, the connectivity check (keep-
alive) by the device is done to this address.
■ "NA": Functionality is not applicable due to one of
the following:
✔
User-type IP Group.
✔
Server-type IP Group, but the keep-alive
mechanism of its' associated Proxy Set is
disabled.
■ "Not Connected": Keep-alive failure (i.e., no
connectivity with the IP Group).
■ "Connected": Keep-alive success (i.e., connectivity
with the IP Group).
The connectivity status is also displayed in the Topology
View page (see Building and Viewing SIP Entities in
Topology View).
Note:
- 351 -
Mediant 4000 SBC | User's Manual
Parameters).
Server.
Server.