AudioCodes Mediant 4000 SBC User Manual page 932

CHAPTER 60 Configuration Parameters Reference
[EnableParametersMonitoring]
'Debug Recording Destination
IP'
configure troubleshoot
> logging settings >
dbg-rec-dest-ip
[DebugRecordingDestIP]
'Debug Recording Destination
Port'
configure troubleshoot
> logging settings >
dbg-rec-dest-port
[DebugRecordingDestPort]
'Enable Core Dump'
[EnableCoreDump]
Parameter Description
■ [swu] Device Software Update = Software updates
(i.e., loading of cmp file) through the Software Upgrade
Wizard.
■ [naa] Non-Authorized Access = Attempts to log in to
the Web interface with a false or empty username or
password.
■ [spc] Sensitive Parameters Value Change =
Changes made to "sensitive" parameters:
✔
(1) IP Address
✔
(2) Subnet Mask
✔
(3) Default Gateway IP Address
✔
(4) ActivityListToLog
■ [ll] Login and Logout = Web login and logout
attempts.
■ [cli] CLI Activity = CLI commands entered by the
user.
■ [ae] Action Executed = Logs user actions that are not
related to parameter changes. The actions can include,
for example, file uploads, file delete, lock-unlock
maintenance actions, LDAP clear cache, register-
unregister, and start-stop trunk. In the Web, these
actions are typically done by clicking a button (e.g., the
LOCK button).
Note: For the ini file parameter, enclose values in single
quotation marks, for example: ActivityListToLog = 'pvc',
'afl', 'dr', 'fb', 'swu', 'naa', 'spc'.
Enables the monitoring, through Syslog messages, of
parameters that are modified on-the-fly.
■ [0] = (Default) Disable
■ [1] = Enable
Defines the IP address of the server for capturing debug
recording.
Defines the UDP port of the server for capturing debug
recording. The default is 925.
Enables the automatic generation of a Core Dump file upon
a device crash.
■ [0] Disable (default)
- 899 -
Mediant 4000 SBC | User's Manual