AudioCodes Mediant 4000 SBC User Manual page 281

CHAPTER 16 Services
●
●
●
The following procedure describes how to configure Remote Web Services through the Web
interface. You can also configure it through ini file [HTTPRemoteServices] or CLI (configure
system > http-services > http-remote-services).
➢
To configure a remote Web service:
1. Open the Remote Web Services table (Setup menu > IP Network tab > Web Services folder
> Remote Web Services).
2. Click New; the following dialog box appears:
3. Configure a remote Web service according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
Table 16-18:Remote Web Services Table Parameter Descriptions
Parameter
General
'Index'
[HTTPRemoteServices_
Index]
'Name'
rest-name
[HTTPRemoteServices_
Name]
'Type'
rest-message-type
You can configure only one Remote Web Service for each of the following server
types: Routing, Call Status, Topology Status, and QoS.
The Routing service also includes the Call Status and Topology Status services.
The device supports HTTP redirect responses (3xx) only during connection
establishment with the host. Upon receipt of a redirect response, the device
attempts to open a new socket with the host and if this is successful, closes the
current connection.
Defines an index number for the new table row.
Note:
■
■
Defines a descriptive name, which is used when associating
the row in other tables.
The valid value is a string of up to 40 characters.
Note:
■
■
■
Defines the type of service provided by the HTTP remote
host:
Description
Each row must be configured with a unique index.
The parameter is mandatory.
Each row must be configured with a unique name.
The parameter is mandatory.
The parameter value cannot contain a forward slash (/).
- 248 -
Mediant 4000 SBC | User's Manual