Viewing Proxy Set Status - AudioCodes Mediant 4000 SBC User Manual

CHAPTER 48 Viewing VoIP Status
# show voip register db sbc user <Address Of Record>

Viewing Proxy Set Status

You can view the status of Proxy Sets that are used in your call routing topology. Proxy Sets that
are not associated with any routing rule are not displayed. To configure Proxy Sets, see
Proxy Sets.
➢
To view the status of Proxy Sets:
■ Open the Proxy Sets Status page (Monitor menu > Monitor tab > VoIP Status folder > Proxy
Sets Status).
Parameter
Proxy Set ID
Name
Mode
Keep Alive
Address
Priority
Table 48-2: Proxy Sets Status Table Description
Displays the Proxy Set ID.
Displays the Proxy Set name.
Displays the Proxy Sets' operational mode:
■ "Parking" or "Homing": Redundancy mode, as configured by the
ProxySet_ProxyRedundancyMode parameter.
■ "Load Balancing: Proxy load balancing mode, as configured by the
ProxySet_ProxyRedundancyMode parameter.
Displays whether the Proxy Keep-Alive feature is enabled ("Enabled") or
disabled ("Disabled"), as configured by the ProxySet_
EnableProxyKeepAlive parameter.
Displays the IP address of the proxy server. This can be the IP address as
configured in dotted-decimal notation for the Proxy Set, or the resolved IP
address of a DNS query if an FQDN is configured for the Proxy Set.
■ IP addresses resolved from FQDNs are displayed as "<FQDN name>
(<resolved IP address>)", for example, "abc.com(10.8.6.80)".
■ The IP address that is currently used for routing is indicated with an
asterisk, for example, "10.8.6.89(*)".
■ If the FQDN failed to be resolved, only the FQDN name is displayed
(e.g., "abc.com").
Displays the priority of IP addresses resolved from FQDNs.
Description
- 749 -
Mediant 4000 SBC | User's Manual
Configuring