AudioCodes Mediant 4000 SBC User Manual page 617

CHAPTER 26 SBC Manipulations
Parameter
General
'Index'
[IPOutboundManipulation_
Index]
'Name'
manipulation-name
[IPOutboundManipulation_
ManipulationName]
'Additional Manipulation'
is-additional-
manipulation
[IPOutboundManipulation_
IsAdditionalManipulation]
'Call Trigger'
trigger
[IPOutboundManipulation_
Trigger]
Match
'Request Type'
request-type
[IPOutboundManipulation_
RequestType]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines a descriptive name, which is used when associating the
row in other tables.
The valid value is a string of up to 40 characters. By default, no
value is defined.
Determines whether additional manipulation is done for the table
entry rule listed directly above it.
■ [0] No = (Default) Regular manipulation rule - not done in
addition to the rule above it.
■ [1] Yes = If the previous table row entry rule matched the
call, consider this row entry as a match as well and perform
the manipulation specified by this rule.
Note: Additional manipulation can only be done on a different
item (source URI, destination URI, or calling name) to the rule
configured in the row above (configured by the 'Manipulated URI'
parameter).
Defines the reason (i.e., trigger) for the re-routing of the SIP
request.
■ [0] Any = (Default) Re-routed for all scenarios (re-routes and
non-re-routes).
■ [1] 3xx = Re-routed if it triggered as a result of a SIP 3xx
response.
■ [2] REFER = Re-routed if it triggered as a result of a REFER
request.
■ [3] 3xx or REFER = Applies to options [1] and [2].
■ [4] Initial only = Regular requests that the device forwards
to a destination. In other words, re-routing of requests
triggered by the receipt of REFER or 3xx does not apply.
Defines the SIP request type to which the manipulation rule is
applied.
■ [0] All = (Default) all SIP messages.
■ [1] INVITE = All SIP messages except REGISTER and
SUBSCRIBE.
■ [2] REGISTER = Only SIP REGISTER messages.
■ [3] SUBSCRIBE = Only SIP SUBSCRIBE messages.
■ [4] INVITE and REGISTER = All SIP messages except
SUBSCRIBE.
■ [5] INVITE and SUBSCRIBE = All SIP messages except
REGISTER.
- 584 -
Mediant 4000 SBC | User's Manual
Description