AudioCodes Mediant 4000 SBC User Manual page 447

CHAPTER 19 Coders and Profiles
Parameter
'Max Opus Bandwidth'
sbc-max-opus-bandwidth
[IpProfile_SBCMaxOpusBW]
Quality of Service
'RTP IP DiffServ'
rtp-ip-diffserv
[IpProfile_IPDiffServ]
'Signaling DiffServ'
signaling-diffserv
[IpProfile_SigIPDiffServ]
Jitter Buffer
'Dynamic Jitter Buffer Minimum
Delay'
jitter-buffer-minimum-
delay
[IpProfile_JitterBufMinDelay]
'Dynamic Jitter Buffer
Optimization Factor'
jitter-buffer-
optimization-factor
[IpProfile_JitterBufOptFactor]
'Jitter Buffer Max Delay'
jitter-buffer-max-delay
[IpProfile_JitterBufMaxDelay]
Voice
'Echo Canceler'
echo-canceller
Description
Defines the VoIPerfect mode of operation, which is based
on the Opus coder.
■ 0 = (Default) Managed Opus
■ 80000 = Smart Transcoding
Note: The parameter is applicable only to the VoIPerfect
feature (see VoIPerfect).
Defines the DiffServ value for Premium Media class of
service (CoS) content.
The valid range is 0 to 63. The default is 46.
Note: The corresponding global parameter is
PremiumServiceClassMediaDiffServ.
Defines the DiffServ value for Premium Control CoS
content (Call Control applications).
The valid range is 0 to 63. The default is 40.
Note: The corresponding global parameter is
PremiumServiceClassControlDiffServ.
Defines the minimum delay (in msec) of the device's
dynamic Jitter Buffer.
The valid range is 0 to 150. The default delay is 10.
For more information on Jitter Buffer, see
Dynamic Jitter Buffer.
Note: The corresponding global parameter is
DJBufMinDelay.
Defines the Dynamic Jitter Buffer frame error/delay
optimization factor.
The valid range is 0 to 12. The default factor is 10.
For more information on Jitter Buffer, see
Dynamic Jitter Buffer.
Note:
■ For data (fax and modem) calls, set the parameter to
12.
■ The corresponding global parameter is
DJBufOptFactor.
Defines the maximum delay and length (in msec) of the
Jitter Buffer.
The valid range is 150 to 2,000. The default is 250.
Enables the device's Echo Cancellation feature (i.e., echo
from voice calls is removed).
- 414 -
Mediant 4000 SBC | User's Manual
Configuring the
Configuring the