AudioCodes Mediant 4000 SBC User Manual page 678

CHAPTER 32 HA Configuration
6. Configure an HA network monitor entry according to the parameters described in the table
below.
7. Click Apply.
Parameter
'Index'
[HaNetworkMonitor_
Index]
'Destination Address'
dest-address
[HaNetworkMonitor_
DestAddress]
'Network Interface'
network-
interface
[HaNetworkMonitor_
NetworkInterface]
'Ping Timeout'
ping-timeout
[HaNetworkMonitor_
PingTimeout]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines destination addresses of network hosts that you want
monitored by the device for the monitored row.
The valid value is a hostname (or FQDN) or IP addresses in dotted-
decimal notation. You can configure only one hostname (which can
be resolved by DNS into up to five IP addresses). You can configure
up to five IP addresses in dotted-decimal notation, where each IP
address is separated by a comma or space, for example, "10.1.1.1
20.2.2.2,30.3.3.3" (without quotation marks).
Note: You cannot configure the parameter with both a hostname and
an IP address.
Assigns one of the device's IP network interface from where you
want to send ping requests to the monitored destinations configured
for the monitored row.
To configure IP interfaces, see
page 96.
Defines how often (in milliseconds) the device sends ping requests to
the destinations configured for the monitored row. This also provides
the device time to wait for a reply (if any) from the destination. For
example, if configured to 100, the device pings the destination every
100 ms.
- 645 -
Mediant 4000 SBC | User's Manual
Description
Configuring IP Network Interfaces on