CHAPTER 51 Reporting Information to External Party
Field
Remote
Packet Loss
[616]
Remote Port
[407]
Remote R
Factor
[626]
Remote
Round Trip
Delay
[617]
Remote
RTP IP
[622]
Displays the number of packets lost of the entire remote stream. The field is an
integer from 0 to 0xFFFFFFFF (-1 if information is unavailable).
Note:
■
The field is included in the default CDR.
■
The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■
The field is applicable only to SBC media and Gateway CDRs.
■
The default field title is "RemotePackLoss".
■
The maximum number of characters for Syslog tabular alignment is 14.
Displays the remote SIP port. This field is an integer from 0 to 0xFFFF.
Note:
■
The field is optional and can be included in the CDR using the Gateway
CDR Format and SBC CDR Format table.
■
The field is applicable only to "CALL_START", "CALL_CONNECT", and
"CALL_END" CDR Report Types.
■
The field is applicable only to SBC media and Gateway CDRs.
■
The maximum number of characters for Syslog tabular alignment is 5.
Displays the remote R-factor conversation quality. The field is an integer from 0
to 120 (127 if information is unavailable).
Note:
■
The field is included in the default CDR.
■
The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■
The field is applicable only to SBC media and Gateway CDRs.
■
The default field title is "RemoteRFactor".
■
If the RTCP XR feature is unavailable (not licensed or disabled), this R-
factor VoIP metric is not provided. Instead, the device sends the CDR field
with the value 127, meaning that information is unavailable.
■
The maximum number of characters for Syslog tabular alignment is 13.
Displays the average round-trip delay time of the remote RTP stream. The field
is an integer from 0 to 10000 ms (-1 if information is unavailable).
Note:
■
The field is optional and can be included in the CDR using the SBC CDR
Format tables..
■
The field is applicable only to "CALL_END" and "MEDIA_END" CDR
Report Types.
■
The field is applicable only to SBC media and Gateway CDRs.
■
The maximum number of characters for Syslog tabular alignment is 9.
Displays the remote RTP IP address.
Note:
■
The field is included in the default CDR.
■
The field is applicable only to "CALL_END", "CALL CONNECT", "MEDIA_
START", "MEDIA_UPDATE", and "MEDIA_END" CDR Report Types.
- 786 -
Mediant 4000 SBC | User's Manual
Description