AudioCodes Mediant 4000 SBC User Manual page 885

Session border controllers

Hide thumbs Also See for Mediant 4000 SBC:

Table of Contents

CHAPTER 57 Testing SIP Signaling Calls

Test Call Rules table configuration:

Batch Test Call Scenario: This example describes the configuration of a batch test call setup

for scheduled and continuous call testing of multiple endpoints. The test call is done between

two AudioCodes devices - Device A and Device B - with simulated test endpoints. This

eliminates the need for phone users, who would otherwise need to answer and end calls many

times for batch testing. The calls are initiated from Device A, where Device B serves as the

remote answering endpoint.

Test Call Rules table configuration at Device A:

Endpoint URI: "101"

Called URI: "201"

Route By: Dest Address

Destination Address: "10.30.40.01"

SIP Interface: SIPInterface_0

Call Party: Caller

Test Mode: Once

Endpoint URI: "101"

Called URI: "201"

Route By: Dest Address

Destination Address: "10.13.4.12"

SIP Interface: SIPInterface_0

Call Party: Caller

Maximum Channels for Session: "3" (configures three endpoints - "101", "102" and

Call Duration: "5" (seconds)

Calls per Sec: "1"

Test Mode: Continuous

Test Duration: "3" (minutes)

Schedule Interval: "180" (minutes)

Mediant 4000 SBC | User's Manual

Troubleshooting