Viewing Performance Monitoring; Viewing Call Success And Failure Ratio - AudioCodes Mediant 4000 SBC User Manual

CHAPTER 47 Viewing Performance Monitoring
47

Viewing Performance Monitoring

This section describes how to view performance monitoring in the device's Web interface.

Viewing Call Success and Failure Ratio

You can view success and failure ratio of SIP dialogs in the Web interface's Success/Failure Ratio
page. You can filter the display by SRD or IP Group, and by call direction and type of SIP dialog
(e.g., INVITEs only). The information is displayed in the following pie charts:
■ Dialog Success Ratio: Displays the SIP call and subscribe (SUBSCRIBE) dialog success-
failed ratio.
■ Dialog Failed Attempts: Displays failed SIP dialog attempts. This includes the number of
calls and subscribes which were successfully and abnormally terminated.
■ Dialog Termination Ratio: Displays SIP dialog termination by reason (e.g., due to no
answer).
➢
To view success and failed call ratio:
1. Open the Success/Failure Ratio page (Monitor menu > Monitor tab > Performance
Monitoring folder > Success / Failure Ratio).
2. From the 'SRD / IP Group' drop-down list, select whether you want to view statistic for an SRD
or IP Group.
3. From the 'Index' drop-down list, select the SRD or IP Group index.
4. From the 'Direction' drop-down list, select the call direction:
● In: incoming calls
● Out: outgoing calls
● Both: incoming and outgoing calls
5. From the 'Type' drop-down list, select the SIP message type:
● INVITE: INVITE
- 737 -
Mediant 4000 SBC | User's Manual