AudioCodes Mediant 4000 SBC User Manual page 155

CHAPTER 13 Network
3. Configure an SRV rule according to the parameters described in the table below.
4. Click Apply, and then save your settings to flash memory.
Parameter
General
'Index'
'Domain Name'
domain-name
[Srv2Ip_
InternalDomain]
'Transport Type'
transport-type
[Srv2Ip_
TransportType]
1st/2nd/3rd Entry
'DNS Name (1-3)'
dns-name-1|2|3
[Srv2Ip_Dns1/2/3]
'Priority (1-3)'
priority-1|2|3
[Srv2Ip_
Priority1/2/3]
Table 13-12:Internal SRV Table Parameter Descriptions
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines the hostname to be translated.
The valid value is a string of up to 31 characters. By default, no value is
defined.
Defines the transport type.
■ [0] UDP (default)
■ [1] TCP
■ [2] TLS
Defines the first, second or third DNS A-Record to which the hostname
is translated.
By default, no value is defined.
Defines the priority of the target host. A lower value means that it is
more preferred.
By default, no value is defined.
Description
- 122 -
Mediant 4000 SBC | User's Manual