AudioCodes Mediant 4000 SBC User Manual page 800

CHAPTER 51 Reporting Information to External Party
# show storage-history
● View all stored, unused CDR files:
# show storage-history unused
■ To delete stored CDR files:
● To delete all stored files:
# clear storage-history cdr-storage-history all
● To delete all unused stored CDR files:
# clear storage-history cdr-storage-history unused
■ To copy stored CDR files to a remote destination:
# copy storage-history cdr-storage-history <filename> to <protocol://destination>
Where:
● filename: name you want to assign the file. Any file extension name can be used, but as
the file content is in CSV format, it is recommended to use the .csv file extension.
● protocol: protocol over which the file is sent (tftp, http, or https).
For example:
copy storage-history cdr-storage-history my_cdrs.csv to tftp://company.com/cdrs
●
●
●
●
●
The following procedure describes how to configure local CDR storage through the Web interface.
➢
To configure local CDR storage:
1. Open the Call Detail Record Settings page (Troubleshoot menu > Troubleshoot tab > Call
Detail Record folder > Call Detail Record Settings).
2. Configure the following parameters:
The SD card provides storage capacity of up to 4 GB for Mediant 4000 and 16 GB
for Mediant 4000B.
If the device is reset or powered off, locally stored CDRs are deleted.
Locally stored CDRs are applicable only to "CALL_END" CDR Report Types and
to SBC signaling CDRs.
When the device operates in High-Availability (HA) mode, active and redundant
devices maintain their own stored CDRs. In other words, upon an HA switchover
the stored CDRs on the active device are not copied to the redundant device
(which becomes the new active device). However, you can view the stored CDRs
on the redundant device without performing a switchover, by accessing the
redundant device from the active device through SSH (or SFTP), as described in
Accessing Files on Redundant Device from Active through SSH
You can customize the CDR fields for local storage. For SBC calls, see
Customizing CDRs for SBC Calls.
- 767 -
Mediant 4000 SBC | User's Manual
on page 650.