AudioCodes Mediant 4000 SBC User Manual page 614

CHAPTER 26 SBC Manipulations
'Request Type'
request-type
[IPInboundManipulation_
RequestType]
'Source IP Group'
src-ip-group-name
[IPInboundManipulation_
SrcIpGroupName]
'Source Username
Pattern'
src-user-name-
pattern
[IPInboundManipulation_
SrcUsernamePrefix]
'Source Host'
src-host
[IPInboundManipulation_
SrcHost]
'Destination Username
Pattern'
dst-user-name-
pattern
[IPInboundManipulation_
DestUsernamePrefix]
'Destination Host'
dst-host
[IPInboundManipulation_
DestHost]
Operation Rule - Action
'Manipulated Item'
manipulated-uri
[IPInboundManipulation_
ManipulatedURI]
Defines the SIP request type to which the manipulation rule is
applied.
■ [0] All = (Default) All SIP messages.
■ [1] INVITE = All SIP messages except REGISTER and
SUBSCRIBE.
■ [2] REGISTER = Only REGISTER messages.
■ [3] SUBSCRIBE = Only SUBSCRIBE messages.
■ [4] INVITE and REGISTER = All SIP messages except
SUBSCRIBE.
■ [5] INVITE and SUBSCRIBE = All SIP messages except
REGISTER.
Defines the IP Group from where the incoming INVITE is
received.
The default is Any (i.e., any IP Group).
Defines the source SIP URI user name (usually in the From
header).
The default is the asterisk (*) symbol (i.e., any source user
name). You can use special pattern notations to denote the user
part. For available notations, see
Routing and Manipulation.
Defines the source SIP URI host name - full name (usually in the
From header).
The default is the asterisk (*) symbol (i.e., any host name).
Defines the destination SIP URI user name, typically located in
the Request-URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination user
name). You can use special pattern notations to denote the user
part. For available notations, see
Routing and Manipulation.
Defines the destination SIP URI host name - full name, typically
located in the Request URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination host
name).
Determines whether the source or destination SIP URI user part
is manipulated.
■ [0] Source = (Default) Manipulation is done on the source
SIP URI user part.
■ [1] Destination = Manipulation is done on the destination SIP
URI user part.
- 581 -
Mediant 4000 SBC | User's Manual
Dialing Plan Notation for
Dialing Plan Notation for